How To fix An IPhone Display (with Footage)

iphone 6 screen replacement kit


wikiHow Account
No account yet? Create an account

Discover Community DashboardRandom ArticleAbout UsCategoriesRecent Adjustments

Help US Write an ArticleRequest a brand new ArticleAnswer a RequestMore Ideas...

EDIT Edit this article

- » Classes
- » Computer systems and Electronics

  • » Telephones
  • » Smartphones
  • » IPhone


How to repair an iPhone Display screen

Three Elements:Lifting Up the ScreenRemoving ComponentsInstalling the new ScreenCommunity Q&A

If you've damaged your iPhone display, you probably must restore it rapidly. If you do not have time or the money to take it into the store for repairs, you possibly can simply and cheaply do it at dwelling. All you want is an affordable restore kit (or simple instruments that you would possibly already have) and new display screen.


Half 1
Lifting Up the Display screen

Remove the screws from the bottom of the telephone. Use a really small star-formed (pentalobe) screwdriver to unscrew the 2 screws at the base of the cellphone. The bottom is right below the house button. Take care not to drop the small screws on the ground after you've got eliminated them.[1] - A really small Phillip's screwdriver won't work to take away these screws. A pentalobe screwdriver has five factors and is a safety feature that Apple continuously makes use of for its products.

Apply a suction cup to the display. Take a small suction cup and place it directly on the underside half of the display screen. Press down firmly so it sticks to the broken display. Your suction cup should have a metal ring extending from it, making it simpler to handle.[2] - If the suction cup is having trouble sticking to the display screen, slightly moisten the suction cup and press it towards the display.

Cover the screen with packaging tape if the suction cup would not stick. In case your display is so broken that the glass is broken in a number of locations, the suction cup could not be able to follow the display. If that's the case, reduce a strip of clear packing tape and canopy your screen with one clean piece. Apply the suction cup to the lined screen.[3][4] - Try to not cover up the house button when placing the tape on.

Pull up on the suction cup. Gently pull up on the suction cup when you hold the cellphone down. You might need to firmly pull up on the display screen a number of occasions before it starts to return away from the frame. When it does, transfer the suction cup to the nook of the display so you have larger leverage when pulling it away.[5] - Remember to keep away from protecting the home button with the suction cup. For those who cover it, the cup won't be capable to suction the display away.

Insert a pry device. Once a part of the display is starting to elevate away at the bottom corner, take a thin pry tool and insert it underneath the display screen. Gently take the pry instrument and slide it along the underside to loosen the screen.[6] - Your repair equipment could have include skinny plastic sliders or guitar picks which you could insert as soon as you've begun prying up the display. Take care to not push them in too far or they might get stuck.

Slide the pry software around your entire edge. Slowly slide the pry tool along every aspect of your phone's display so that you simply loosen it evenly. Avoid pulling up a lot on one side since this might harm or split the display or dwelling button. Your purpose is to loosen and then take away the screen in a single piece.[7][8] - You might find it easier to slide a thin guitar choose as an alternative of a prying software when loosing the edges of the screen.


Raise up the display. Hold the bottom of the phone down by inserting your fingertips on one facet of the telephone. Hold your other hand over the telephone so that your thumb is one one side of the screen and your index and middle finger are on the alternative side. Gently lift the display up about 90 levels.[9] - Bear in mind that the screen remains to be connected to wires within the phone so do not fully take away the display screen.

Part 2
Eradicating Parts

Remove the top-proper shield. In case you have a look at the highest-proper hand corner of the inside of your phone, you will see a small steel plate with three screws holding it in. You'll need to remove those screws and take away the shield proper to left. Elevate the shield away.[10][11] - Keep your screws and shield together but away from some other screws and components you have already removed. This can make it simpler to reassemble.

Launch the connectors. Beneath the metal shield, you'll see three ribbon-like connectors which can be preserving the display screen and backside of the telephone collectively. Release each ribbon, starting with the one on prime. You possibly can lift the display screen away.[12] - You will want to use your fingertips to gently pry up the ribbons.

Remove the top metal plate of the earpiece. Once you've got lifted away the screen, you should see a small steel plate near the highest inside your cellphone. Take the pentalobe screwdriver and take away the two tiny screws so to carry the small plate away.[13] - Put aside the screws and plate, holding them separate from different screws and items.

Take away the house button screws. At the underside of the phone, you may see a steel plate masking the home button. Take your pentalobe screwdriver and take away the two small screws.[14] - If you discover it tough to unscrew the screws, adhesive could also be conserving them in place. Proceed using the screwdriver until the come out. While some folks suggest using a hair dryer to heat up the adhesive, this could overheat and harm the cellphone's LCD.

Unscrew and lift away the again plate. It is best to see two small screws on the again plate itself (near the home button at the bottom and the earphone piece close to the top) and two along each aspect of the telephone. Take your pentalobe screwdriver and take away the screws. Remove the again plate and set it aside.[15][16] - Consider setting every screw near where it goes on the cellphone. This will make it simpler to recollect where each one goes while you reassemble the plate.

Lift away the house button and plate. Flip the telephone over and push the button via the cellphone so that it falls out. Now you'll be able to slowly peel back the plate to remove it. Avoid pulling it quickly or twisting since this can rip it. You must also take away the connectors at the highest of the display screen.[17][18] - You need to have already removed the screws from the plate.

Half three
Installing the new Display screen


Install the home button. Get your new screen out and place the home button screen into it. Set the steel home button plate over it and use the pentalobe and screws you removed earlier to safe it to the new display.[19] - Make certain the sticker for the home button sticks down.


Reattach the top connectors. Discover the small metallic tip of the connector that goes back into the top of the telephone. Fastidiously insert this into its gap earlier than you push in the remainder of the connector.[20] - The digicam ought to sit in its exposed hole if you've completed this step accurately.


Secure the again plate. Set the metallic again plate over the phone and screw it again in. Keep in mind that there are two screws on the plate (one close to the top and one near the underside) and two screws on each aspect.[21] - Since the screws are totally different sizes it is essential to get the proper screws again into place.


Reattach the earpiece. Set the earpiece again in the top right corner of the telephone. Discover the screws that you simply removed for it and screw them back in so that the earpiece is secured to the telephone.[22] - It is best to have two screws for the earpiece.


Join the brand new display to the telephone. You must have three ribbon-like connectors coming off of the new display. Insert these into the telephone near the highest. Be sure to insert the bottom connector first as a way to easily put on the highest connector last. Set the metallic plate back over the connectors and screw it again in.[23][24] - In case your phone would not come on as soon as you've completely changed the display screen, one of those connectors is probably not inserted fully or accurately. Take away the screen and examine the connectors.


Press the brand new display screen onto the phone. Once the display screen and telephone are loosely connected, lower the screen into place on the cellphone. Make sure the guides are correctly inserted on the top corners. No gaps ought to exist along the top, then firmly press the display onto the phone from the top to the bottom. Screw within the last two screws on the bottom of the cellphone (these are the ones subsequent to the lightening port). You can now turn on and use your phone.[25] - You should not have any gap between the cellphone and the display.

Community Q&A

Is there a method to repair the again of a cracked iphone 8 screen replacement kit X without the repair equipment? I haven't got the money or time to buy one.

wikiHow Contributor
Community Reply

No. In case you broke the glass back of your iPhone X, you'll have to get a equipment or take it to knowledgeable.
Thanks! Yes No
Not Useful 0 Useful 1

Already answered
Not a question
Unhealthy question

Issues You may Want

Broken iPhone 5

Substitute glass display

Pentalobe screwdriver (star-formed tip)

Suction cup with ring

Pry device

EditRelated wikiHows

The right way to

Sources and Citations

- Videos offered by TheUnlockr

1. ↑
2. ↑
3. ↑
4. ↑
5. ↑
6. ↑
7. ↑
8. ↑
9. ↑
10. ↑
11. ↑
12. ↑
13. ↑
14. ↑
15. ↑
16. ↑
17. ↑
18. ↑
19. ↑
20. ↑
21. ↑
22. ↑
23. ↑
24. ↑

12/16/2018 21:27:52
Or visit this link or this one